ACER X1470 DRIVERS

Use a phillips screwdriver to loosen the four screws on the heat sink, in the order as shown below. Other offers may also be available. Estimated on or before Fri. If any problems are found, replace the FRU. Page 51 Secure the bracket to the chassis with one screw. Disassembly Tools In performing the disassembly process, you will need the following tools: Installing The Optional Expansion Boards Installing the Optional Expansion Boards Position the expansion board over the PCIe x16 slot and move it slightly to the right 1 , making sure the card guide is aligned with the slot guide on the chassis.

Uploader: Zulkitaur
Date Added: 2 October 2009
File Size: 19.76 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 21747
Price: Free* [*Free Regsitration Required]

Remove the screw from the expansion board bracket opposite the PCIe x1 slot.

Removing the Mainboard Remove the six screws that secure the mainboard to the chassis. For Acer authorized service providers, your Acer office may have a different part number code from those given in the FRU list of this printed Service Guide. The items listed in this section are for reference only. Although the memory can be installed one module at a time, the best performance comes from using matched pairs of modules.

Related Drivers:  ATI 8500DV DRIVERS FOR MAC DOWNLOAD

Delivery acer x1470 may vary, especially during peak periods. Add to watch list. The pictures acer x1470 tables in this section illustrate the physical outlook of the computer.

It’s used to store acer x1470 for programs sequences of instructions on a temporary basis. Pressing the power acer x1470 does not turn on The following table describes the main checkpoints where the DIM module is accessed. A new, unused item with absolutely no signs of wear. This message usually indicates that the CMOS battery needs to be replaced.

Reinstalling the Side Panel Align the tabs on the lower edge of the side panel acer x1470 the notches on the bottom side of the chassis. Disconnect the other end of the Acer x1470 cable from the mainboard.

Installing the Optional Expansion Boards Position the expansion board over the PCIe x16 slot and move it slightly to the right 1making sure the card guide is aligned with the slot guide on the chassis.

Related Drivers:  BCM2035B BLUETOOTH DRIVERS FOR WINDOWS MAC

Lift the board from the chassis.

Credit Cards processed by PayPal. Gently pull up the expansion board 1move it slightly to the left and acer x1470 2 from the slot. System Architecture This chapter shows the block diagram and board layout of the Aspire AX computer. There are items available. Connect acer x1470 ATX power supply cables to its mainboard connector. When setting a jumper, ensure that the jumper caps are placed on the correct pins. Connect the auxiliary case power supply connector to PWR1.

Acer Aspire XUR30P Specs – CNET

Verify that all power and acer x1470 cables are firmly and properly attached to the installed drives. Other offers may also be available.

Learn More – opens in a new window or tab Any international shipping and import charges are paid acer x1470 part to Pitney Bowes Inc. Disconnect the SATA 1 and power 2 cables from the rear of the hard disk drive.

Related Drivers:  AT91 USB TO SERIAL CONVERTER DRIVER

Acer Aspire X1470 Service Manual

Push the side panel toward the front of the acer x1470 until it is firmly closed. Note the arrow on the corner and make sure the processor is properly oriented over the socket. This may indicate a problem with the mainboard.

Shipping cost acer x1470 be calculated. Grasp the cable end of the connector and pull it straight up 2. Estimated on or before Fri. Pull the front bezel away from the chassis.