SAVIN C2828 DRIVER FOR WINDOWS XP

Shake a bag of developer and pour it into the development hopper [A]. Turn the machine power on. When you attach the new drum unit to the development unit, remove a front cover and a front joint at first and use them for reassembling the new drum unit and development unit. Savin C Yellow Drum Replacement — What follows are the guidelines for the drum and developer restoration. Otherwise, the hopper cover may be damaged. Execute the drum phase adjustment with SP twice.

Uploader: Shaktir
Date Added: 6 June 2006
File Size: 23.81 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 92202
Price: Free* [*Free Regsitration Required]

Otherwise, the hopper cover may be damaged.

Remove the front savin c2828 [A] The front joint [D] is firmly set. Do the ACC procedure. The new drum unit has a front cover and a front joint.

savin c2828 Shake a bag of developer and pour it into the development hopper [A]. The hook breaks easily. Do not let metal objects touch the development sleeve. Hopper cover [A] 4 hooks Release the three hooks first in the correct savin c2828 Put the head of a screwdriver in the groove gap [B] as shown, and then release the hook.

Related Drivers:  TSHARC LINUX DRIVER FOR MAC

Entering SP Mode 1. The steps below included directions for both replacement procedures.

Savin C Toner Cartridge and Printer Supplies at

Remove it with a flat screwdriver. When reassembling the PCU: You must be logged in to post a comment. savin c2828

Drum unit [A] and Development Unit [B] 8. Reattach the hopper cover hook x 3.

Lever lock [A] 3. When you attach the new drum unit to the development unit, remove a front cover and a front joint at first and use them for reassembling the new savin c2828 unit and development unit.

Enter the Service Mode. Make sure that the harness [A] savin c2828 hooked as shown.

Product Center

Keep the developer off at both ends of the savin c2828 unit enclosed in red lines in the diagram. Turn the machine power on.

Savin C Yellow Drum Replacement — What follows are the guidelines for the drum and developer restoration. Rotate the development roller savin c2828 five or six times in the counterclockwise direction. Front cover [A] Do savin c2828 touch the bearing [A] after removing the front cover. This step removes developer that has stuck to the development roller, which would cause color unevenness. Safin the drum positioning plate [D].

Related Drivers:  OLIVETTI OLIBOOK M1025 DRIVER

Savin C Supplies

Execute the drum phase adjustment with SP twice. Open the front door. Pull out the PCU hold savin c2828 grip while you pull it savin c2828. Turn the drum positioning plate lever [B] and the image transfer unit lock lever [C] counter-clockwise.

Savin C2828 Supplies

Majority of print quality problems are related savin c2828 parts of the drum unit. When the development unit is removed from the drum unit, clean the entrance mylar [C] with a vacuum. Savin c2828 the bushing [A] of the development roller at the rear of the PCU 6. Leave a Reply Cancel reply You must be logged in to post a comment.

Follow the correct order. Turn the machine power off.

See Also

Related Drivers:  CASPER W765S WIRELESS DRIVERS